We had to rearrange a one bedroom, one bathroom apartment to open up entirely to a single façade, a mere 5,6 metres wide. We therefore had to generate a typology similar to those on a lineal block building, with a central corridor, and dwellings on each side facing opposite facades.
The “apartment” was the conclusion of studying several distribution schemes created by jigsaw-puzzles composed of several squares that corresponded to the minimum surface areas and widths required on the city’s building code.
We divided the dwelling into two different, parallel spaces, coinciding with the offset created by the elevator shaft. It was clear from the beginning that the living room would be located on the widest space and bedroom on the narrower one.
The wider section (3’00m) accommodates the kitchen, dinning room, and living room, making the most of its longer length. We located a row of ceiling height cabinets that integrate the large appliances, electric and water-heating installations, a cleaning closet, and a wardrobe closet next to the entry for coats. This also helps to isolate the home from the noises of the communal corridor and stairs.
The narrower section (2’60m) accommodates the bathroom and bedroom. Once again, the cabinets that are used as closets help to isolate the bedroom from the bathroom.
To make both sections appear wider than what they are, it was important to us that one could look across from one section to the other appreciating the entire 5,6 metres of the facade uninterruptedly. To do this, very large pocket doors were designed to hide in a single central panel, which is used to support a shelf for the television.
We could not change the dimensions of the window opening, so instead of using a classic, symmetric, double leaf arrangement, we opted for livelier, more functional composition. By leaving the rest of the space, with clean lines and neutral, luminous colours, we managed to make the window’s new composition stand out from the rest of the elements in the space.